FAQs • How do I schedule an inspection?

How do I schedule an inspection?: You can call our office at (901) 385-6425 to schedule an inspection. We make next day inspections unless there is an open ditch, which we will make those the same day they are called in. All inspections must be called in by the person who obtained the permit(i.e. electrical inspection called in by electrical contractor).

Code Enforcement

1. When is a permit required?: A permit is required for any alteration or repair to a building, any new building, fence, swimming pool, sign (new or face change), detached building, siding, decks, and special events. Separate permits are necessary for plumbing, electrical, mechanical & gas piping if these particular trades are being done. These subcontractor permits can only be obtained by licensed contractors of that trade. This list might not be all inclusive. For additional information, please contact Code Enforcement at (901) 385-6425.

2. How do I obtain a Permit Application Form & how long is the permit valid?: A Permit Application Form can be obtained from our office at 6382 Stage Road from 8:00 a.m. to 5:00 p.m., Monday through Friday or by downloading the appropriate form HERE. Other documentation may be required for our office to issue a permit. A permit is valid for 6 months provided construction has begun and inspections have been started. If more than 6 months elapses between inspections, the permit becomes void.

3. What documents do I need to bring along to apply for a permit?: Depending on the work to be done, certain documentation is required. Most work that is done will require a copy of the Surveyor's Plot Plan. This document looks like a map of the property and should be in your closing papers. Please contact our office at (901) 385-6425 if you have any questions regarding what documentation will be needed to apply for a permit.

4. How do I schedule an inspection?: You can call our office at (901) 385-6425 to schedule an inspection. We make next day inspections unless there is an open ditch, which we will make those the same day they are called in. All inspections must be called in by the person who obtained the permit(i.e. electrical inspection called in by electrical contractor).

5. Why are inspections needed?: Inspections are required to make sure the work is being done properly. We make sure through our inspection process that the code is being followed and no unsatisfactory work, faulty materials or violations to the code are being made that could result in unsafe or hazardous conditions for you, your family, employees or the general public.

6. What types of inspections are required?: It depends on the type of work being done. Our office has compiled a flow chart of what typical inspections are to be made for the type of job you are requesting a permit for. Please request a copy of a flow chart when you apply for your permit.

7. If I have a technical question about my project, who should I contact?: Our inspectors are in the office from 8:00 am to 9:00 am and then again from 4:00 pm to 5:00 pm. They will be glad to assist you during these hours to answer any questions you might have. Our office number is (901) 385-6425.